Model No.: PH8020
Measuring range: 0-14pH
Temperature range:0-85°C
Compressive strength:0.6MPa
Material: PPS/PC
Slope: ≥96%
Zero point potential: E0=7PH±0.3
Internal impedance: MΩ(25°C) ≤250 MΩ
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
Application: Measurement of all kinds of pure water and high-purity water.
Model No.: PH8022
Measuring range: 0-14pH
Temperature range:0-85°C
Compressive strength:0.6MPa
Slope: ≥96%
Zero point potential: E0=7PH±0.3
Internal impedance: MΩ(25°C) ≤250 MΩ
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
Application: Measurement of all kinds of pure water and high-purity water.
Features of PH Electrode:
It adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and it adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block .
Long-distance reference diffusion channel greatly extends the service life of electrodes in theharsh environment.
It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is no need of the jacket, thus saving the installation cost.
The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 40meters free of interference.
There is no need for additional dielectric and there is a little amount of maintenance.
High measurement accuracy, fast echoing and good repeatability.
Reference electrode with silver ions Ag/AgCL
Proper operation shall make service life longer.
It can be installed in the reaction tank or pipe laterally or vertically.
The electrode can be replaced by a similar electrode made by any other country.
Electrode Structure Chart
Electrode Wiring Plug
BNC (Q9) Plug Pin Y Plate
Sensor family :