1. Measuring range: 0-14 PH
2. Temperature range:0-85°C 3. Compressive strength:0.6MPa 4. Slope: ≥96% 5. Zero point potential: E0=7PH±0.3 6. Internal impedance: MΩ(25°C) ≤250 MΩ 7. Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution
grounding) 8. Installation size: Upper and Lower 3/4NPT Pipe Thread 9. Connection: Low-noise cable goes out directly.
1.It adopts the world-class solid dielectric and a large area of PCE liquid for junction,
difficult to block and easy maintenance 2. Long-distance reference diffusion . greatly extends the service life of electrodes
in the harsh environment. 3.A new design of glass bulb increases the bulb area, prevent bubble formation
interference within the buffer, makes the measurement more reliable. 4.It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is
easy for installation and there is no need of the jacket, thus saving the installation cost. 5.The electrode adopts the high-quality low-noise cable, which makes the signal
output length less than 20 meters free of interference. 6.The electrode made with lowest impedance sensitive glass, in a low conductivity,
high water situation, has the advantages of fast response, accurate measurement,
good stability, not easy to hydrolysis. 7. High measurement accuracy, fast echoing and good repeatability. 8.Reference electrode with silver ions Ag/Ag CL 9. Proper operation shall make service life longer. 10. It can be installed in the reaction tank or pipe laterally or vertically. 11. The electrode can be replaced by a similar electrode made by any other country.
